RockOS/kernel/drivers/atapi/ata_stubs.S

#include "drivers/atapi/ata.h"

.code32

.extern selected_drive_primary
.extern selected_drive_secondary

.global ident_device
ident_device:
    push %ebp 
    mov %esp, %ebp 

    push %ebx 
    push %ecx 
    push %edx
    push $0

    mov 8(%ebp), %ebx    # ebx = bus base address
    mov 12(%ebp), %ecx   # ecx = drive select mask

    # drive select
    mov %ebx, %edx
    add $IO_DRIVE_SELECT_REG, %edx
    mov %cl, %al
    outb %al, (%dx)

    xor %eax, %eax
    # clear sector count and LBA
    mov %ebx, %edx
    add $IO_SECTOR_COUNT_REG, %edx
    outb %al, (%dx)

    mov %ebx, %edx
    add $IO_LBA_LO_REG, %edx
    outb %al, (%dx)

    mov %ebx, %edx
    add $IO_LBA_MID_REG, %edx
    outb %al, (%dx)

    mov %ebx, %edx
    add $IO_LBA_HI_REG, %edx
    outb %al, (%dx)

    # send ident
    mov %ebx, %edx
    add $IO_CMD_REG, %edx
    mov $0xEC, %al
    outb %al, (%dx)

    mov %ebx, %edx
    add $IO_STATUS_REG, %edx
    inb (%dx), %al
    inb (%dx), %al
    inb (%dx), %al
    inb (%dx), %al

    cmp $0xFF, %al          
    je not_found
    test %al, %al      
    jz not_found

poll_status:
    inb (%dx), %al
    test $STATUS_REG_BSY, %al
    jnz poll_status

check_ata:
    mov %ebx, %edx
    add $IO_LBA_MID_REG, %edx
    inb (%dx), %al
    test %al, %al
    jnz check_atapi
    
    mov %ebx, %edx
    add $IO_LBA_HI_REG, %edx
    inb (%dx), %al
    test %al, %al
    jnz check_atapi

    mov $0x01, (%esp)
    jmp poll_drq

check_atapi:
    # check if atapi device 
    mov %ebx, %edx
    add $IO_LBA_MID_REG, %edx
    inb (%dx), %al 
    cmp $0x14, %al
    jne not_found

    mov %ebx, %edx
    add $IO_LBA_HI_REG, %edx
    inb (%dx), %al
    cmp $0xEB, %al
    jne not_found
is_atapi:
    mov $0x02, (%esp)
    mov %ebx, %edx
    add $IO_CMD_REG, %edx
    mov $(ATAPI_CMD_IDENTIFY_PACKET), %al
    outb %al, (%dx)

    mov %ebx, %edx
    add $IO_STATUS_REG, %edx
    inb (%dx), %al
    inb (%dx), %al
    inb (%dx), %al
    inb (%dx), %al
1:
    inb (%dx), %al
    test $STATUS_REG_BSY, %al
    jnz 1b


poll_drq:
    mov %ebx, %edx
    add $IO_STATUS_REG, %edx
    inb (%dx), %al

    test $STATUS_REG_ERR, %al
    jnz error

    test $STATUS_REG_DRQ, %al
    jz poll_drq

drq_set:
    mov %ebx, %edx
    add $IO_DATA_REG, %edx 

    mov 16(%ebp), %edi
    mov $256, %ecx 
read_data:
    inw (%dx), %ax
    mov %ax, (%edi)
    add $2, %edi
    loop read_data

    jmp done

not_found:
error: 
    mov $0x0, (%esp)
done:
    pop %eax
    pop %edx                    
    pop %ecx
    pop %ebx
    leave
    ret